【TELEC认证】智能体重称TELEC认证怎么做测试 智能体重称TELEC认证怎么办理证书【费用 周期 机构 报价】

智能体重秤TELEC认证需通过以下测试并完成流程：

一、核心测试项目
电气安全：依据AS/NZS 60335标准，测试绝缘电阻（≥2MΩ）、耐压（如双重绝缘需3750V/1分钟）等。
计量准确性：按OIML R76标准，用标准砝码验证称重误差（如1000g需在999.5g-1000.5g之间）。
重复性测试：在50%最大称量点多次加载，评估结果一致性。
偏载测试：验证秤台不同位置称量的一致性。
二、办理流程
准备资料：产品说明书、电路图、BOM表、关键元器件证书等。
选择机构：由澳大利亚JAS-ANZ认可的实验室测试。
产品测试：完成电气安全、计量准确性等测试。
工厂检查（如适用）：高风险产品需接受初始审核及年度抽查。
提交申请：向认证机构递交测试报告及技术文件。
获证与贴标：通过后颁发SAA证书，有效期5年。
三、注意事项
证书需由澳大利亚当地公司或代理持有。
未认证产品可能面临高额罚款（个人1万美元，企业20万美元）。
若已有CB报告（含澳洲差异），可缩短周期至2周。

The TELEC certification for intelligent weighing scales requires passing the following tests and completing the process:
1、 Core testing projects
Electrical safety: According to AS/NZS 60335 standard, test insulation resistance (≥ 2M Ω), withstand voltage (e.g. 3750V/1 minute for double insulation), etc.
Measurement accuracy: According to OIML R76 standard, verify the weighing error with standard weights (such as between 999.5g-1000.5g for 1000g).
Repeatability test: Load multiple times at 50% of the maximum weighing point to evaluate the consistency of the results.
Partial load test: Verify the consistency of weighing at different positions on the scale platform.
2、 Handling process
Preparation materials: product manual, circuit diagram, BOM table, key component certificates, etc.
Select institution: Tested by a laboratory accredited by JAS-ANZ in Australia.
Product testing: Complete electrical safety, measurement accuracy, and other tests.
Factory inspection (if applicable): High risk products require initial audit and annual spot checks.
Submit application: Submit test reports and technical documents to the certification body.
Certification and Labeling: Upon approval, a SAA certificate will be issued, valid for 5 years.
3、 Precautions
The certificate must be held by a local Australian company or agent.
Unverified products may face high fines ($10000 for individuals and $200000 for businesses).
If there is already a CB report (including Australian differences), the cycle can be shortened to 2 weeks.