【SAA认证】吸尘器SAA认证怎么做测试 吸尘器SAA认证怎么办理证书【费用 周期 机构 报价】
吸尘器要做SAA认证，核心是确保其符合澳大利亚的电气安全标准，测试和办理流程如下：
测试项目：主要依据AS/NZS 60335.1（通用要求）和AS/NZS 60335.2.2（吸尘器特殊要求）进行。测试包括标签与说明检查、电气强度（耐压测试）、接地电阻测试（如适用）、功率和电流输入测试、温升测试（电机、外壳等部位）、机械危险测试（如吸尘器进口是否会造成伤害）、异常操作测试（如电机堵转测试）以及结构检查（内部布线、电气间隙等）。
办理证书步骤：
准备资料：包括产品说明书（英文）、电路图、PCB布局图、关键元器件清单（BOM表）及认证证书复印件（如电机、电源线、插头等最好已具备CB证书或VDE、UL等国际认证）、产品规格书、外观图、结构图、铭牌图等。
选择认证机构：选择一家三方检测机构（如质科Qstlab007）并提交申请。
产品测试：机构将样品送至实验室进行上述测试。
评估报告与签发证书：测试通过后，认证机构会评估测试报告和技术文件，合格后签发符合性证书。
RCM注册：取得证书后，需在澳大利亚的EESS数据库中进行注册，注册成功后可标记RCM标志。
整个流程通常需要4-6周，建议提前规划并选择专业机构协助，确保资料准确齐全，避免延误。
Vacuum cleaners need to undergo SAA certification, with the core being to ensure compliance with Australia's electrical safety standards. The testing and processing procedures are as follows:
Test items: mainly based on AS/NZS 60335.1 (general requirements) and AS/NZS 60335.2.2 (special requirements for vacuum cleaners). The testing includes label and instruction inspection, electrical strength (withstand voltage test), grounding resistance test (if applicable), power and current input test, temperature rise test (motor, housing, etc.), mechanical hazard test (such as whether the vacuum cleaner inlet will cause injury), abnormal operation test (such as motor stalling test), and structural inspection (internal wiring, electrical clearance, etc.).
Steps for obtaining a certificate:
Preparation materials: including product manual (in English), circuit diagram, PCB layout diagram, list of key components (BOM) and copies of certification certificates (such as motors, power cords, plugs, etc., preferably with CB certificates or international certifications such as VDE and UL), product specifications, appearance drawings, structural drawings, nameplate drawings, etc.
Choose a certification agency: Select a third-party testing agency (such as Qstrab007) and submit an application.
Product testing: The institution sends samples to the laboratory for the aforementioned testing.
Evaluation report and certificate issuance: After passing the test, the certification body will evaluate the test report and technical documents, and issue a certificate of conformity after passing the test.
RCM registration: After obtaining the certificate, it is necessary to register in the EESS database in Australia. After successful registration, the RCM logo can be marked.
The entire process usually takes 4-6 weeks. It is recommended to plan ahead and choose a professional organization to assist, ensuring accurate and complete information and avoiding delays.