【PSE认证】美容仪PSE认证怎么做测试 美容仪PSE认证怎么办理证书【费用 周期 机构 报价】
美容仪出口日本需通过PSE认证，根据《电气用品安全法》，美容仪通常属于“非特定电气用品”，需取得圆形PSE标志。以下是具体流程：
一、认证流程
前期准备
确认产品类别（圆形PSE适用）。
选择日本经济产业省认可的第三方认证机构（如JET、JQA）。
准备技术文件：包括产品规格书、电路原理图、日文说明书、关键元器件清单等。
测试阶段
送样至实验室进行测试，主要项目包括：
电气安全测试（耐压、接地电阻、泄漏电流）。
机械和热保护测试（温升、机械强度）。
电磁兼容性测试（EMC）。
测试标准通常为JIS C或IEC标准转化版本。
认证申请
提交申请表格并缴纳费用（约5-15万日元）。
部分产品需工厂审查。
获得证书后，加贴圆形PSE标志。
二、METI备案（如需）
已取得PSE认证且在日本有进口商时，需进行METI备案。
提交PSE证书、技术参数表等材料，支付约2万日元费用。
三、标签要求
必须标注圆形PSE标志、额定电压、功率及制造商信息。
日文说明书和铭牌需符合规范。
Beauty devices exported to Japan need to pass PSE certification. According to the Electrical Appliance Safety Law, beauty devices are usually classified as "non-specific electrical appliances" and require a circular PSE mark. The following is the specific process:
1、 Certification process
preliminary preparation
Confirm product category (applicable for circular PSE).
Choose a third-party certification body recognized by the Japanese Ministry of Economy, Trade and Industry (such as JET, JQA).
Prepare technical documents, including product specifications, circuit schematics, Japanese manuals, key component lists, etc.
testing phase
Send samples to the laboratory for testing, including:
Electrical safety testing (withstand voltage, grounding resistance, leakage current).
Mechanical and thermal protection testing (temperature rise, mechanical strength).
Electromagnetic compatibility testing (EMC).
The testing standards are usually converted versions of JIS C or IEC standards.
certification application
Submit the application form and pay the fee (approximately 50000 to 150000 yen).
Some products require factory inspection.
After obtaining the certificate, affix a circular PSE logo.
2、 METI filing (if required)
When PSE certification has been obtained and there is an importer in Japan, METI filing is required.
Submit PSE certificate, technical parameter table and other materials, and pay a fee of approximately 20000 yen.
3、 Label requirements
The circular PSE logo, rated voltage, power, and manufacturer information must be marked.
The Japanese instruction manual and nameplate must comply with the specifications.