【CB认证】眼部按摩器按摩仪CB认证怎么做测试 眼部按摩器按摩仪CB认证怎么办理证书【费用 周期 机构 报价】

眼部按摩器CB认证需按IEC 60335-2-32标准测试，流程如下：

一、认证流程
选择机构：确认认证机构具备IEC认可资质（如TÜV莱茵、UL等）。
提交申请：提供技术文件（电路图、BOM表、说明书等）及样品。
测试评估：实验室进行电气安全、EMC、机械强度等测试。
审核发证：通过后颁发CB证书（有效期3年）。
二、测试重点
安全测试：耐压（3000V）、接地连续性（≤0.1Ω）。
EMC测试：传导骚扰（150kHz-30MHz）、静电抗扰度（±8kV）。
机械性能：结构强度、材料耐热性。
三、关键资料
技术文件：电路图、装配图、BOM表。
测试报告：需覆盖IEC 60335-2-32全部条款。
四、注意事项
国家差异：如目标国有特殊要求（如沙特需沙尘测试），需补充测试。
证书转换：凭CB报告可快速申请各国认证（如UL、GS）。
建议优先选择具备眼部按摩器测试经验的机构，确保流程高效。

The CB certification of eye massagers requires testing according to the IEC 60335-2-32 standard, and the process is as follows:
1、 Certification process
Select organization: Confirm that the certification organization has IEC accreditation qualifications (such as T Ü V Rheinland, UL, etc.).
Submit application: Provide technical documents (circuit diagrams, BOM tables, manuals, etc.) and samples.
Testing and evaluation: Laboratory testing for electrical safety EMC、 Mechanical strength and other tests.
Audit and certification: Upon approval, a CB certificate (valid for 3 years) will be issued.
2、 Test focus
Safety testing: withstand voltage (3000V), grounding continuity (≤ 0.1 Ω).
EMC testing: Conducted disturbances (150kHz-30MHz), electrostatic immunity (± 8kV).
Mechanical properties: structural strength, material heat resistance.
3、 Key Information
Technical documents: circuit diagram, assembly diagram, BOM table.
Test report: must cover all clauses of IEC 60335-2-32.
4、 Precautions
National differences: If the target country has special requirements (such as Saudi Arabia requiring sand and dust testing), additional testing is required.
Certificate conversion: CB report can be used to quickly apply for certification in various countries (such as UL, GS).
It is recommended to prioritize institutions with experience in testing eye massagers to ensure efficient processes.